ISO 20653 — Standard

About the Standard

Scope title: protection against dust, water and contact in vehicles (IP)

ISO 20653 is a standard published by International Organization for Standardization (ISO). The international standards organisation; it publishes the widest body of management system, test method and product standards.

See the other 310 codes from ISO

Coverage areas

Standard-Based Tests — What Does This Group of Pages Cover?

The section below describes the field that code ISO 20653 belongs to; it is not the text of the standard or the regime itself. The scope title of the code is given above, and technical requirements are shared at the quotation stage.

Standard-based tests are test pages whose address comes from a standard number. What the user is looking for is often not the name of the test but the code written in their specification: not "salt spray test" but "ASTM B117", not "drop test" but "IEC 60068-2-31", not "vibration" but "MIL-STD-810 Method 514".

This preference reflects the reality in the field. An engineer sees a code in the specification received from a customer and searches for that code; they do not need to know the name of the test. The code is the identity of the test and distinguishes the different adoptions of the same test by different bodies.

This group addresses the different adoptions of the SAME TEST separately. The same physical phenomenon may be published under different numbers by ISO, ASTM, EN, IEC, DIN and JIS. Even where the numbers are the same (as with ISO 6892-1 and EN ISO 6892-1), specimen preparation, conditions, calculation details and reporting may differ; adoptions may carry national annexes. The code written in the specification therefore governs, and "similar" is not accepted.

Searching at code level meets a different need from searching at scope level. A user searching for "corrosion testing" wants to learn about the field; a user searching for "ASTM B117" has a specification in hand and wants to know the feasibility, duration and price of that test. Two different intents require two different page structures.

The page for a code describes the scope of that code, the test field it belongs to, the product groups in which it is required and how it differs from neighbouring codes. Test conditions, durations and acceptance criteria are NOT CARRIED: these are defined in the copyrighted text of the standard and in the product specification. This boundary is a deliberate choice; a wrong duration or acceptance criterion means directly incorrect work.

Different parts of the same code and different adoptions of the same number are linked between pages. A user searching for IEC 60335 also sees 60335-2-40; a user searching for ISO 6892-1 also sees the EN ISO 6892-1 and DIN EN ISO 6892-1 adoptions. These links are derived from the number of the code rather than written by hand.

The edition year is NOT CARRIED in the library. It is held as "ASTM D638" rather than "ASTM D638-22", because the edition in force changes over time and the address of the page should not age with the edition. If a year is stated in your specification, that edition governs; if not, the most current edition is applied.

Method groups in this field

Searching by code
Direct search for the code written in the specification; it is found in the library with its code, scope title and issuing body.
Searching by scope title
A test whose code is not known is searched by its subject; a search for "salt spray" brings up the related codes.
Series and part relationships
The other parts of the same series are shown, derived from the number of the code.
Adoption relationships
Different bodies' adoptions of the same number are matched; the claim is kept limited to "the same number".
Superseded codes
Withdrawn codes are not held in the library but, when searched for, the user is directed to the counterpart in force.

Commonly confused in this field

Different adoptions of the same number are not identical texts; they may carry national annexes.
The code written in the specification governs; a technically similar code cannot be substituted.
If an edition year is stated, that edition is applied; the most current edition is not automatically accepted.
A code page carries no test conditions or acceptance criteria; these are in the copyrighted text of the standard and in the product specification.
A part code (for example -2-40) may not be sufficient on its own; the general part of the series is applied as well.

Which decisions these results support

Matching the code written in the specification to the correct laboratory scope
Distinguishing between equivalent adoptions
Clarifying the scope and edition at the quotation stage
Finding the current counterpart of withdrawn codes

Structure of the Code

Published by: ISO
Serial number: 20653
Part: without partition

Codes in the library without release year is kept. The current version changes over time; If the year is specified in your specification, that version is taken as basis, if not specified, the most current version is applied.

Scope

Test
Standard-Based Tests
Automotive Testing

Related Tests and Services

Of the 2 pieces of content this code is referenced in, the 1 with their own published page are listed below.

Test · 1

IP69K – ISO 20653

Technical Requirements

Standard texts are copyright of the relevant organization; test condition, sample and acceptance criteria cannot be fitted here.

Technical requirements specific to your product, once we clarify the scope At offer stage shared in writing.

Relevant Product Groups and Legislation

This code is included in the standard tag of the product pages below.

These product pages carry notes for the following markets: European Union, United Kingdom, USA. Whether the standard is mandatory in the relevant market varies depending on the product group and the applicable legislation.

Regulations published with this code on the same product pages:

(AB) 2018/858Vehicle Type-Approval FrameworkApproval of motor vehicles and their components. Component and separate technical unit approval run under this framework; the E mark arises from it.
UNECEUNECE 1958 AgreementType-approval under component-specific UNECE regulations (e.g. R10 EMC, R30/R54 tyres, R43 glazing).
UNECE R10UNECE R10Electromagnetic compatibility approval for vehicles and their components.
2011/65/EURoHSRestriction of hazardous substances in electrical and electronic equipment.
2000/53/ATELVEnd-of-life vehicles. Sets heavy-metal restrictions and recoverability targets.
(EU) 2017/745MDRThe Medical Device Regulation. Classification (I, IIa, IIb, III), clinical evaluation, technical documentation and post-market surveillance obligations; the notified body's role grows as the class rises.
(EU) 2017/746IVDRThe In Vitro Diagnostic Medical Devices Regulation. In vitro diagnostic devices fall under this regulation instead of the MDR.
(AB) 2017/745 art. 33EUDAMEDThe European medical device database. From 28 May 2026, the actor registration, UDI/device, certificate and market surveillance modules are mandatory; placing on the market is not possible without a valid SRN.
2006/42/ATMachinery Directive (overlap)Relevant essential requirements also apply to medical devices that also qualify as machinery.
(EC) 1907/2006REACHRegistration, evaluation, authorisation and restriction of chemicals; SVHC notification.
(EU) 2023/1230Machinery RegulationReplaces 2006/42/EC and becomes mandatory on 20 January 2027 with no further transition period. Requires notified-body involvement for Annex I high-risk machinery.
2014/35/EULVDThe Low Voltage Directive. Governs electrical safety in the 50–1000 V AC range.
2014/30/EUEMCThe Electromagnetic Compatibility Directive. Emission and immunity are covered together.
2014/34/ABATEXEquipment and protective systems used in explosive atmospheres. The category and conformity route are determined by zone classification.
2000/14/ATNoise EmissionNoise emitted into the environment by outdoor equipment. Machinery within scope requires a sound-power-level declaration and marking.
2014/68/EUPEDThe Pressure Equipment Directive for pressurised parts; the category is determined by pressure and volume.
(EU) 2024/573F-GasRefrigerant type, GWP value and leak-tightness obligations for systems containing a refrigerant.
(AB) 547/2012Ecodesign (water pumps)Ecodesign requirements for water pumps. Sets minimum efficiency index and product-information requirements.
(AB) 2019/1781Ecodesign (electric motors)Efficiency class requirements for electric motors and variable-speed drives.
(AT) 1935/2004Food Contact MaterialsGeneral requirements for equipment in contact with food; material conformity is required for valves in food lines.
(AB) 2020/2184Drinking Water Contact ProductsHygiene requirements for materials in contact with water under the Drinking Water Directive.
2014/29/ABSimple Pressure VesselsA separate directive for series-produced simple pressure vessels; its scope must be distinguished from the PED.
2010/35/ABTransportable Pressure EquipmentThe pi mark and periodic inspection regime for transportable pressure equipment.
2009/48/ECToy SafetyThe Toy Safety Directive. Regulates mechanical, physical, flammability, chemical and electrical safety requirements together; a technical file and safety assessment are mandatory.
EN 62115Electrical toysSafety for electric toys; applies to mains-connected or battery-powered toys.
(AT) 1907/2006 Annex XVII item 51-52Phthalate RestrictionRestriction of certain phthalates in toys and childcare articles.
(EU) 2023/1542Batteries RegulationBattery obligations and a removability requirement for toys containing a battery.
(AB) 1007/2011Textile LabellingTextile fibre names and labelling. Declaration of fibre composition and regulation of the label language.
(AT) 1907/2006 Annex XVII item 43Azo Dye RestrictionRestriction of certain azo dyes in textiles in contact with skin.
(AB) 2019/1021PFAS / PFOA RestrictionRestriction of PFOA and its derivatives under the Persistent Organic Pollutants Regulation.
(EU) 2023/988GPSRThe General Product Safety Regulation. The safety framework for consumer products not covered by sector-specific legislation.
(EU) 2016/425Personal Protective Equipment (overlap)The PPE Regulation's scope and category are determined for textiles with a protective function.
(AB) 10/2011Plastics in Food ContactPlastic materials in contact with food. The list of authorised substances, and overall and specific migration limits.
(AT) 2023/2006Good Manufacturing PracticeGood manufacturing practice (GMP) for food-contact materials.
(AB) 2025/40Packaging and Packaging WasteThe Packaging and Packaging Waste Regulation. Recyclability, recycled-content and packaging-reduction obligations; replaces 94/62/EC.
(AB) 2022/1616Recycled PlasticRecycled plastic materials in contact with food.
(EU) 2024/3110Construction Products RegulationDeclaration of performance and CE marking for construction products. Most provisions apply from 8 January 2026; it progressively replaces (EU) 305/2011.
(AB) 305/2011CPR (transition)Continues to apply during the transition period for product groups where a new harmonised standard has not been published.
EN 13501-1Reaction-to-Fire ClassificationReaction-to-fire class for construction products; a mandatory item of the declaration of performance.
(EU) 2023/1115Deforestation (wood-based)A deforestation-free supply declaration for wood and derived construction materials.
(AT) 1223/2009Cosmetic Products RegulationThe Cosmetic Products Regulation. Appointing a responsible person, the product information file (PIF), the safety assessment (CPSR) and CPNP notification are mandatory; there is no product approval, and responsibility rests with the manufacturer.
(AT) 1223/2009 Annexes II-VIProhibited and Restricted SubstancesLists of prohibited substances, restricted substances, and permitted preservatives, colorants and UV filters.
(AT) 1223/2009 art. 16Nanomaterial NotificationA separate notification six months before placing on the market for products containing nanomaterials.
(AT) 1223/2009 art. 18Animal Testing BanA ban on animal testing of finished products and ingredients, and on placing animal-tested products on the market.
(AT) 178/2002General Food LawThe general principles of food law, traceability and food safety responsibility.
(AT) 852/2004Food HygieneHygiene rules for food businesses and the obligation for a HACCP-based system.
(AB) 1169/2011Food Information to ConsumersFood labelling; nutrition declaration, allergen information and origin information.
(AB) 2023/915ContaminantsMaximum levels of contaminants in food.
(AT) 396/2005Pesticide residuesMaximum residue limits in food of plant and animal origin.
(AT) 2073/2005Microbiological CriteriaMicrobiological criteria for foodstuffs.

Related Standards

Frequently Asked Questions

Is this standard mandatory for my product?

Whether it is mandatory depends on the product group, the target market and the applicable legislation. Once you tell us your product and market, we clarify in writing whether this standard is required.

How long does the test process take?

Duration depends on the scope of the standard, the number of specimens and current capacity. The exact duration is shared, together with the specimen and scope details, at the quote stage.

Do you issue certification against this standard?

Which activity is carried out under which accreditation scope is separately confirmed at the application stage. Up-to-date scope information is published on our corporate page.

What happens if the standard I need is not here?

The library is based on a continuously growing inventory. If you cannot find the code you are looking for, you can send it through the quote form; we will assess the relevant scope and get back to you.