Construction Sector
Construction Testing, Certification and Conformity
Overview
Construction sector: an overview of conformity processes
For construction firms, the ISO 9001 / ISO 14001 / ISO 45001 trio is the standard tender requirement. That the construction materials used carry the CE mark and a Declaration of Performance is a separate obligation.
How we work
Six steps from scope to certificate
Scope
We determine your product, target market and sector; the required legislation list is produced.
Quote
Testing and audit items are priced separately; the quote is delivered within 24 hours.
Sample / Planning
Sample requirements are shared, or an on-site audit is scheduled.
Testing & Audit
Testing or audit is carried out according to the method of the relevant standard.
Report & Document
A report is issued; if within certification scope, the process proceeds to the decision stage.
Maintaining the validation
Surveillance audits and legislative changes are tracked.
Product groups
Construction sector: what do we test?
- 01Building and infrastructure projects
- 02Prefabricated building elements
- 03Construction machinery and equipment
- 04Scaffolding and formwork systems
Services
The work we carry out in this sector
From testing laboratories to inspection, surveillance, audit, verification and calibration — all the services the Construction supply chain needs are under one roof.
All services
Standards
Standards referenced by the sector
Content is linked to standards based on the product's intended use, target market and technical characteristics.
- ASTM E119Fire resistance in building elements
- ASTM E84flame spread on the surface
- EN 13501-1Reaction to fire class in building materials
- EN 13501Fire classification of building products
- ASTM C1036flat glass specification
- ASTM C1048heat treated flat glass specification
- ASTM C109compressive strength in cement mortar
- ASTM C1161Flexural strength at room temperature in advanced ceramics
- ASTM C1260potential alkali reactivity of aggregate
- ASTM C131Los Angeles abrasion resistance in aggregate
- ASTM C136sieve analysis of aggregate
- ASTM C138Unit weight, efficiency and air content in concrete
- ASTM C1421Fracture toughness in advanced ceramics
- ASTM C143slump in fresh concrete
- IEC 60068-2-27mechanical shock test
- 16 CFR Part 1203Safety specification for bicycle helmets
- 16 CFR Part 1512safety specifications for bicycles
- API 610centrifugal pumps in the oil and gas industry
- API 617axial and centrifugal compressors in the oil and gas industry
- API 682Seal systems in pumps and compressors
- ASME B46.1surface roughness and waviness
- ASME PTC 19.3Performance test code in temperature measurement
- ASTM A370Mechanical test methods on steel products
- ASTM D1002shear strength in metal adhesive connections
- ASTM D1876peel resistance in adhesives (T-peel)
- ASTM D2344short beam strength in composites
- ASTM D3039Tensile properties in polymer matrix composites
- ASTM D3410Compression properties in polymer matrix composites
- ASTM E119Fire resistance in building elements
- ASTM E84flame spread on the surface
- UL 94flammability class in plastic materials
- EN 13501-1Reaction to fire class in building materials
- ISO 4589combustion behavior with oxygen index
- ISO 5660heat release with cone calorimeter
- EN 13501Fire classification of building products
- EN 45545fire safety in railway vehicles
- EN 71-2combustibility of toys
- 16 CFR 1610flammability of clothing textiles
- 16 CFR 1630Flammability in carpets and rugs
- 16 CFR 1632flammability of mattresses by cigarettes
- 16 CFR 1633flaming ignition in beds
- 16 CFR Part 1610Flammability in clothing textiles
- 16 CFR 1303lead in surface coatings
- ASTM D4236chronic health hazard labeling on art materials
- ASTM D5116Determination of organic emissions from indoor materials
- BS 6920Suitability of materials in contact with drinking water
- EN 12457leaching experiment in the characterization of waste
- EN 12472Nickel release after wear and corrosion in plated products
- EN 12619total gaseous organic carbon in flue gas
- EN 12873Effect of materials coming into contact with drinking water
- EN 13284Determination of dust in stationary source emissions
- EN 13432compostability and biodegradability of packaging
- EN 13650aqua regia extractable element in fertilizers
- EN 14181Quality assurance of automatic measurement systems for stationary source emissions
- EN 14789determination of oxygen in flue gas
- EN 14790determination of water vapor in flue gas
Certification
Documents that enable your product to reach the market
Global Market Access
Construction which market will you offer your product to?
Construction when offering products to different markets, technical legislation, tests, documents and conformity requirements may vary by country and region.
View all markets
Explore other sectors
