Loading

router/modem — product image

Kablosuz cihaz

router/modem testing and certification

A wireless network router and modem.

router/modem — conformity scope

A router is a radio device: radio equipment legislation requires electrical safety, EMC and spectrum use under one roof; the frequency band and output power determine the scope. Because it is a connectable device, cybersecurity requirements are also added to the process.

The list below is the European Union framework. The same product falls under a different mark and approval regime in another market; Smart Service Finder shows that market's requirements when you select it.

Regulation

router/modem legislation that typically comes into play for

The following is the European Union framework and shows typical application. Which title actually applies depends on the class, intended use and components of the product; The scope is determined by examining the product.

RED2014/53/EU

The Radio Equipment Directive. Spectrum, EMC and electrical safety are assessed together on the radio interface; the 3.3(d)(e)(f) cybersecurity articles apply from 1 August 2025.

CRA(EU) 2024/2847

The Cyber Resilience Act. Cybersecurity requirements for products with digital elements; reporting from 11 September 2026, full application from 11 December 2027.

RoHS2011/65/EU

Restriction of certain hazardous substances in electrical and electronic equipment; an integral part of the CE declaration.

WEEE2012/19/AB

Waste electrical and electronic equipment. Requires marking and registration with the collection system.

Ecodesign (networked standby)(AB) 1275/2008

Minimum requirements for standby and off-mode power consumption in networked equipment.

NIS2 (indirect)(EU) 2022/2555

Cybersecurity risk management for essential and important entities; a network-equipment supplier is affected through its customers' obligations.

Standards

Standards typically referenced in the dossier

What is required?

Each item links to the relevant service page: the legislation entry to the certification scheme, the test family to the laboratory page, and the mark to the market page.

European Union — required mark

4

Required legislation

3

What must be in the technical file

6
  • Technical file and radio spectrum assessment
  • EU declaration of conformity (DoC)
  • SAR assessment (for near-body use)
  • Frequency band and output power declaration
  • User manual and warnings
  • Details of the authorised representative or importer established in the EU

How does the process work?

The flow below is a general order independent of product type; timing and acceptance criteria are determined by the standard the product falls under.

  1. 1

    Defining the scope

    It is determined which legislation the product falls under based on its technical characteristics and intended use.

  2. 2

    Testing and evaluation

    Tests are planned for the applicable headings; results are evaluated according to the relevant standards.

  3. 3

    Technical file

    Design, production and test records are compiled in the technical file, accompanied by a risk assessment.

  4. 4

    Declaration or certificate

    Depending on the product group, the manufacturer's declaration is prepared or third-party certification is carried out.

router/modem which market is it going to?

Who bears the obligation, where the test will be performed, and what customs will require all vary by market.

What changes depending on the market?

Same product, different regimen

  • European UnionThe file is built under RED; the 3.3(d)(e)(f) cybersecurity articles are met by applying the EN 18031 series. If a restricted item is triggered, a notified body becomes involved.
  • United KingdomThe UKCA regime carries the same technical requirements into its own legislation; CE marking is recognised indefinitely for many product groups, and the declaration runs through a UK-based responsible person.
  • United StatesEquipment authorisation under FCC 47 CFR Part 15 Subpart C and E, and a UL 62368-1 safety assessment are required.

Products in the same group

router/modem — let's work out the scope together

Share the product's technical characteristics; let us tell you in writing which headings apply to your scope and which tests are required.

Request a quote

This result is a starting roadmap, not a conformity assessment. Which legislation a product falls under depends on its technical characteristics, intended use and user group; it is only finalised by examining the product. You may have an obligation not shown in the list, and an item shown here may not apply to your product.

We use cookies required for the site to work. With your permission we also add an analytics cookie to understand how pages are used. Cookie Policy