About the Standard
Scope title: greenhouse gas quantification and reporting at the organization level
ISO 14064-1 is a standard published by International Organization for Standardization (ISO). The international standards organisation; it publishes the widest body of management system, test method and product standards.
See the other 310 codes from ISOCoverage areas
Verification — What Does This Activity Do?
The section below describes the field that code ISO 14064-1 belongs to; it is not the text of the standard or the regime itself. The scope title of the code is given above, and technical requirements are shared at the quotation stage.
Verification activities independently confirm that the data an organisation declares is accurate and complete. Greenhouse gas declarations, carbon footprint calculations, sustainability reports, recycled content claims and energy saving declarations are assessed within this scope.
Verification is NOT a test; it is an EXAMINATION OF EVIDENCE. The verifier does not make measurements in a laboratory; they examine the organisation's data collection method, calculation boundaries, the emission factors used, internal controls and the traceability of the calculation. The result is an opinion on whether the declaration is presented accurately at a defined level of assurance.
THE LEVEL OF ASSURANCE is the most important technical concept in the field. Reasonable assurance requires deeper examination and more evidence than limited assurance and results in a stronger statement. The two levels differ in cost and duration; which one is required comes from legislation or from the context in which the declaration will be used.
THE DEFINITION OF SCOPE AND BOUNDARIES determines the result in this field. In a greenhouse gas calculation, Scope 1 (direct emissions), Scope 2 (purchased energy) and Scope 3 (value chain) produce very different magnitudes; a carbon footprint figure is meaningless without stating which scopes are included. In most organisations the bulk of emissions sits in Scope 3, and that is the hardest part for data collection.
The body of standards is layered: corporate-level greenhouse gas accounting falls under ISO 14064-1, project-level reductions under ISO 14064-2, the verification process under ISO 14064-3 and the competence of the verification body under ISO 14065. Product-level carbon footprint runs through ISO 14067, life cycle assessment through ISO 14040 and ISO 14044, and environmental product declarations through ISO 14025.
Life cycle assessment (LCA) is the most labour-intensive part of the field: the environmental impacts of a product at every stage from raw material to disposal are calculated. The result is sensitive to the chosen system boundary, the functional unit and the database; two LCAs made for the same product under different assumptions cannot be compared.
On the regulatory side the obligations are increasing rapidly. The carbon border adjustment mechanism requires declaration of the embedded emissions of imported products; sustainability reporting regulations make assurance of corporate declarations mandatory; the battery regulation introduces a carbon footprint declaration. This turns verification from a voluntary practice into a regulatory requirement.
Greenwashing risk shapes the commercial side of the field. An unsupported environmental claim now carries not only reputational risk but also the risk of enforcement under consumer legislation. Verified data has therefore become part of a legal defence rather than of a marketing claim.
Method groups in this field
Defining scope and boundaries
Definition of the system boundary, functional unit and included scopes at corporate or product level.
Data and calculation review
Verification of the source of activity data, the measurement method, emission factors and the traceability of calculation steps.
Internal control assessment
Examination of the controls, responsibilities and approval mechanisms in the data collection process.
Site verification
On-site confirmation of significant emission sources and measurement points.
Materiality assessment
Assessment of whether errors and omissions materially affect the declaration.
Forming an opinion
Writing the verification opinion at the defined level of assurance and stating any qualifications.
Commonly confused in this field
- A carbon footprint figure without a stated scope is meaningless; Scopes 1, 2 and 3 produce very different magnitudes.
- Verification is not a test; projects that begin with an expectation of laboratory measurement run into a mismatch of scope.
- The level of assurance determines cost and duration; limited assurance and reasonable assurance are not the same thing.
- Two LCAs made with different system boundaries cannot be compared; a comparative claim requires the same assumptions.
- The choice of emission factor changes the result markedly; its source and year must be documented.
- An unsupported environmental claim carries the risk of enforcement under consumer legislation; marketing copy must stay within verified data.
Which decisions these results support
- Assurance of greenhouse gas declarations and carbon footprints
- Meeting sustainability reporting obligations
- Responding to customer, investor and tender requests
- Supporting recycled content and green claims
- Preparing declarations under the carbon border adjustment mechanism
Structure of the Code
- Published by
- ISO
- Serial number
- 14064
- Part
- 1
The last "1" is the section number of the standard. Chapters organize different coverages of the same series; The requirements of whichever section is written in the specification are applied.
Codes in the library without release year is kept. The current version changes over time; If the year is specified in your specification, that version is taken as basis, if not specified, the most current version is applied.
Scope
- Verification
Related Tests and Services
Of the 1 pieces of content this code is referenced in, the 1 with their own published page are listed below.
Verification · 1
Technical Requirements
Standard texts are copyright of the relevant organization; test condition, sample and acceptance criteria cannot be fitted here.
Technical requirements specific to your product, once we clarify the scope At offer stage shared in writing.
Other Parts of the Same Series
ISO 14064 series is also present in the library with the following parts.
Related Standards
Frequently Asked Questions
Is this standard mandatory for my product?
Whether it is mandatory depends on the product group, the target market and the applicable legislation. Once you tell us your product and market, we clarify in writing whether this standard is required.
How long does the test process take?
Duration depends on the scope of the standard, the number of specimens and current capacity. The exact duration is shared, together with the specimen and scope details, at the quote stage.
Do you issue certification against this standard?
Which activity is carried out under which accreditation scope is separately confirmed at the application stage. Up-to-date scope information is published on our corporate page.
What happens if the standard I need is not here?
The library is based on a continuously growing inventory. If you cannot find the code you are looking for, you can send it through the quote form; we will assess the relevant scope and get back to you.