Electrical Product Safety (ENEC) Certification

ENEC (European Norms Electrical Certification) is a VOLUNTARY safety mark showing that electrical products in Europe conform to EN standards. Its difference from CE is that it rests on third-party certification: the product is tested by an independent certification body, and the production site is audited periodically. It is common for luminaires, transformers, switches and components.

• Manufacturers of luminaires and LED drivers
• Manufacturers of switches, sockets and wiring accessories
• Manufacturers of transformers and power supplies
• Suppliers whose European buyers request a third-party safety certificate

Not mandatory; it does not replace the CE mark and complements it. The requirement comes from the market: an ENEC mark is sought when European retailers and project customers want third-party verification in addition to the manufacturer's own declaration.

• Type testing under the relevant EN safety standard
• Verifying the conformity of critical components
• A factory audit and assessment of the production control system
• Certification and the right to use the ENEC mark
• Periodic factory surveillance
• Notifying product changes and reassessment

1. 1Application and Product DescriptionThe product family, model list, technical specifications and target market are determined. The applicable standard and certification route become clear at this step.
2. 2Technical File ReviewDesign documents, the bill of materials, critical-component certificates and the instructions for use are examined.
3. 3Product TestingThe tests the relevant standard requires are carried out. The test report is the fundamental basis for the certification decision.
4. 4Factory AuditIf the scheme requires it, the continuity of manufacturing and factory production control (FPC) are verified on site.
5. 5Issuing the Certificate and MarkingOnce conformity is verified, the certificate is issued; the marking rules for the product and packaging are applied.
6. 6Follow-up AuditsDepending on the scheme, periodic factory audits and/or follow-up testing on samples taken from the market are carried out.

The validity period varies by scheme: some product certificates are indefinite and rely on periodic factory audits, while some schemes (e.g. country market marks) require annual or per-shipment renewal. Every design change to the product requires the certificate to be reviewed.

• The list of product models and variants
• Technical drawings, diagrams and the bill of materials
• Certificates for critical components
• The instructions for use and a sample label
• Existing test reports, if any
• Production-site details

There is no fixed list price; the cost is calculated based on the following variables and provided in writing in the quote.

• The number of models and variants in the product family
• The test scope the applicable standard requires
• Whether a factory audit is required
• The number of target markets and whether each requires separate testing
• Whether existing test reports can be accepted

Product certification is carried out under ISO/IEC 17065; The tests that form the basis for certification are carried out in laboratories with ISO/IEC 17025 accreditation. The two scopes are separate. Recognition between accreditation bodies is provided through IAF and ILAC agreements.

The scope under which this scheme can be offered varies according to your product and activity; it is confirmed in writing at the quote stage.

• CEEU Product Conformity
• UKCAUnited Kingdom Conformity
• GSGermany Product Safety
• S-MarkProduct Safety Mark
• ULNorth America Product Safety
• ETLNorth America Product Safety
• CSACanada Product Safety
• FCCRadio/EMC